Electricity is a primary need in the industrial world that supports all operations or activities. Starting from production machines to lighting systems, everything depends on a safe and stable electricity supply.
However, behind the importance and benefits of electricity in the industrial world, electricity also has the potential for danger that can be said to be quite large, especially if the electrical components used are not up to standard. The electrical component that plays a crucial role in industrial electricity is the plug! This tool is a connection between the electrical cable and the equipment. Therefore, the plug must be chosen properly to prevent electrical accidents in the industry due to short circuits or electric shocks.
If you are looking for the best quality and most trusted industrial plug, then Schneider Electric has the answer! Through the Industrial Plug & Socket product series, Schneider Electric presents the S56 Plug that is suitable for industrial needs.
Want to know the complete function and specifications? Read this article to the end!
Understanding the Schneider Electric S56 Plug
The Schneider Electric S56 Plug is an electrical device that is inserted into a socket box to open or close an electrical circuit. In addition, this tool can also connect electrical devices to their power sources in buildings.
In the industrial world itself, the commonly used plug is a multi-phase plug, which is useful for connecting a power source to a load or tool that will be supplied with voltage or for industrial power distribution. This industrial plug is usually used to connect special electrical equipment in industrial environments. Designed to be waterproof, it can withstand difficult conditions and is durable in harsh and extreme industrial environments.
Then, plugs that are specifically for industrial needs, such as the Schneider Electric S56 Plug, also have high durability to prevent power outages and stoppages and can support product operations in a more efficient way and without frequent disruptions.
Identify the Function of the Schneider Electric S56 Plug
Like plugs in general, the function of the Schneider Electric S56 Plug is to connect electrical equipment, production machines, and control systems in the factory to the power source. This plug will work together with the socket box to allow electrical equipment to be connected to the power source by plugging the plug into the socket box.
Not only to turn on electrical devices in the industry, the plug also functions as a tool to connect and disconnect electric current in an easier way. In addition, industrial plugs also function as safety devices to prevent users from being electrocuted.
Getting to Know the Complete Specifications of the Schneider Electric S56 Plug
The Schneider Electric S56 Plug is included in the Industrial Plug & Socket product series, which can be used for various applications, such as factories, agriculture, commercial buildings, marine, and so on. This S56 Plug can also be used in outdoor locations, where ordinary switches and socket boxes are not adequate, such as in swimming pools and tennis courts. This is because this tool has an IP66 protection level specification. To find out more complete specifications, see below:
Characteristics:
- Has an angled shape for neater installation
- Screw ring for socket box security
- IP66 protection level
- Available pin count: 3 Pins, 4 Pins, and 5 Pins
- Pin shape: Flat Pin and Round Pin
- Rated Current: 13A, 15A, 20A, 32A, and 50A
- Rated Voltage: 250 V and 500 V
- Color: Gray and Orange
That's the explanation of the Schneider Electric S56 Plug, from its function to its complete specifications. With the availability of various types of plugs, you can choose according to your industry needs, all of which have the same best quality.
Get the product by ordering it now here!
Or do you want to find various interesting information about electricity and complete specifications of other electrical products? Just check it out in other Listrik Kita's articles!
